基本安装流程
Basic installation process
进行安装申请并取回安装图纸——依据施工图纸放样——安装立柱——悬挂网片——清场收工并请求验收
Apply for installation and retrieve the installation drawings - lofting according to the construction drawings - installing columns - hanging meshes - closing the site and requesting acceptance
高速公路护栏网由于使用位置的不同，安装也有着细微的差别。它的安装位置分为高速公路桥梁、高速公路道路两侧和中央隔离带三个地方。下面分别介绍一下它们的安装细节及注意事项
The installation of highway guardrail network is also slightly different because of its different location. Its installation location is divided into three parts: highway bridge, both sides of highway road and central isolation zone. Here are the installation details and precautions.
高速公路护栏网在道路两侧的安装
Installation of Highway Fence Network on Both Sides of Road
其目的是阻断内外行人与车辆以及牲畜的进入，形成一个全封闭的无比延长的护栏网网墙，以满足交通安全和收费管理的双重目的。在取得安装许可并拿回施工图纸后，按照安装流程进行施工，首先清理施工现场，去除障碍物，填坑平坡，使前进的安装路线基本达到一个较平缓的安装要求，当然不必要求太高，只要能满足安装的目的，也就基本上能验收合格，再整多平，你超出成本预算，业主也不会多给你的。
Its purpose is to block the entry of pedestrians, vehicles and livestock, and to form a fully enclosed and indefinitely prolonged fence network wall to meet the dual purposes of traffic safety and toll management. After obtaining the installation permission and taking back the construction drawings, the construction is carried out according to the installation process. First, the construction site is cleaned up, obstacles are removed, and the pit slope is filled, so that the forward installation route basically meets a relatively gentle installation requirement. Of course, the requirement is not too high. As long as the purpose of installation is met, it can basically check and accept. If you exceed the cost budget, the owner will not give you more.